Diffuser Oil Information

Please Note: When smelling this product directly out of the container, it may seem light in nature. It is not a good representation of what it smells like when it is diffused or sprayed out of the bottle.

Please read instructions below for proper usage:

For the best results in an oil diffuser, use approximately 1/4 - 1/2 fill in your dropper per 75 – 100 mL (2.5 – 3.5 oz.) of water. Because this product is 100% active, oil-based, blended with fine fragrance and made with natural essential oils, it is:
• Very slippery on bare floors – When spraying this product over bare non-carpeted floors, the oil can make the floor slippery. This usually happens when multiple sprays are sprayed in the same area. If this happens, clean up the overspray using a wet mop or cloth. Can also be sprayed in room corners.
• Because this product does not contain water and is 100% active, avoid contact with leather, vinyl, wood, plastic, and painted surfaces. It could leave a mark on the surfaces listed. If overspray gets on these surfaces, immediately wipe it off with a wet cloth.

Please note: Various oil scents diffuse at different rates. For best results, start with a small amount of oil and increase gradually to your find optimum strength.